FIN STABILIZERS
Stabilis Electra
FIN STABILIZERS
Stabilis Electra
HS System
The HS System is an evolution of the SE Stabilis Electra System, optimised for planing yachts that can reach over 24 knots.
The HS system has some notable improvements compared to the previous model, including: greater optimisation of the fin profile for better performance and a reduction of the resistance; updated electronics for even faster and more controlled performance in addition to the ability to control integrated systems (for example, steering or intruder) together with the fins.
LR System
The LR System has been optimised for displacement or semi-displacement yachts.
This new product has several notable benefits such as: compact actuators with the same power of the equivalent SE system; better performance; a fin geometry specifically designed for displacement yachts; the possibility to install fins of up to 5 square meters and new electronics with the ability to integrate the controls for up to 8 different systems. The LR range uses a highly accurate inertial detector that detects the Roll, Pitch and Yaw of the yacht which in turn provides the input to the system to provide a very high level of platform stability.
DISCOVER HOW THE CMC’S FULL ELECTRIC INTEGRATED SYSTEM WORKS
COMPANY BROCHURE
STABILIS ELECTRA HS BROCHURE
STABILIS ELECTRA LR BROCHURE
HS40
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 5,0 kW motor rating. |
| Standard fin size: | 0,80 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 200V AC 1-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 65 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 120 kg |
HS60
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 5,0 kW or 7,0 kW motor rating. |
| Standard fin size: | 1,00 m2 – 1,20 m2 – 1,40 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase or 200V AC 3-phase or 200V AC 1-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 85 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 145 kg |
HS80
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 5,0 kW or 7,0 kW motor rating. |
| Standard fin size: | 1,60 m2 – 1,85 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase or 200V AC 3-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 100 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 235 kg |
HS120
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 7,0 kW or 9,0 kW or 11,0 kW motor rating. |
| Standard fin size: | 1,85 m2 – 2,00 m2 – 2,35 m2 – 2,50 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase or 200V AC 3-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 120 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 358 kg |
HS160
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 15,0 kW motor rating. |
| Standard fin size: | 3,00 m2 – 3,30 m2 – 3,50 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 140 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 603 kg |
HS200
TECHNICAL SPECIFICATIONS
(for one actuator)
| Electrical motor: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 22 kW motor rating. |
| Standard fin size: | 4,00 m2 |
| Fin rotational speed: | From 0 deg/s to 80 deg/s |
| Voltage: | 400VAC 3-phase or 200VAC 3-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | |
| Maximum power absorption in at anchor condition*: | |
| Fin attachment: | Precision machined oversized self-locking taper. |
| Main shaft: | |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including the electric motor): |
LR70
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 7,0 kW motor rating. |
| Standard fin size: | 1,50 m2 – 1,70 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase or 200V AC 3-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 90 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 264 kg |
LR90
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 7,0 kW or 9,0 kW motor rating. |
| Standard fin size: | 1,90 m2 – 2,10 m2 – 2,35 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase or 200V AC 3-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 120 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 362 kg |
LR150
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 11,0 kW motor rating. |
| Standard fin size: | 2,70 m2 – 2,90 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase. |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 130 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 488 kg |
LR170
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 15,0 kW motor rating. |
| Standard fin size: | 3,15 m2 – 3,50 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 140 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 603 kg |
LR200
TECHNICAL SPECIFICATIONS
(for one actuator)
| Motor type: | Brushless type with elettromagnetic brake. |
| Applicable range of electrical motor: | 22,0 kW motor rating. |
| Standard fin size: | 3,70 m2 – 4,00 m2 – 4,30 m2 – 4,50 m2 |
| Maximum fin rotational speed: | > 80 deg/s |
| Power supply: | 400V AC 3-phase |
| Frequency: | 50 Hz or 60Hz. |
| Maximum absorption range in underway condition*: | – |
| Maximum power absorption in at anchor condition*: | – |
| Fin connection: | Precision machined oversized self-locking taper. |
| Shaft diameter and material: | 160 mm diameter duplex stainless steel. |
| Fin actuator housing material: | High strength ductile iron. |
| Upper and lower bearing: | Heavy-duty tapered roller bearings. |
| Lower seal: | Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer. |
| Upper seal: | Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants. |
| Lubrication: | Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil. |
| Fit & finish throughout: | Painted RAL 9016 and polished. |
| Actuator weight (including electric motor): | 1160 kg |
COMPACT FIN STABILIZERS
For yachts starting from 12m (40 ft) LOA up to 40m (130 ft)
DIA-LOG SOFTWARE
Fast response and high performance
The patented electric control system.
DIA-LOG is a very flexible electronic control system that enables the customer to take all the advantages of the Stabilis Electra stabilizers system.
The user has the complete control of the Stabilis Electra system through the touch screen interface (and the backup control panel) located in wheelhouse.
ARGO: the clever ride control system
ARGO ride control combines the stabilisers and rudders action for an optimal course stability improving comfort, safety and fuel efficiency.
ARE YOU INTERESTED IN
THE BEST COMFORT ON BOARD?
THE BEST COMFORT ON BOARD?
WHERE TO BUY
Please contact us for any kind of question regarding our products,
their performances and our after sales and assistance network.
We will get back to you as soon as possible.