STABILIS ELECTRA

Discover the first and unique patented electric stabilizing fin

STABILIS ELECTRA

THE NEW REVOLUTION

Stabilis Electra, covered by EU patent n. 2172394 and launched on the market by CMC Marine in 2008, is the first electrical stabilization system in the world. Over the years, Stabilis Electra has been furtherly developed and improved, reaching the highest quality standards which characterize this unique and innovative stabilization system.

Stabilis Electra won the DAME Design Award as Most Innovative product, and the Qualitec Technology Award as most technological innovations.

 

patent

SWITCH TO ELECTRIC

In the new yachts generation market, the demand for an efficient stabilization at anchor is no longer an optional but it is becoming more and more a must-have. Stabilizers system must react faster than the induced roll, as well as the forces generated by the fin movements have to be well phased with the ship roll angles. The aim to offer a system with a higher dynamic and a more accurate response, in order to satisfy the new market’s needs.

And CMC Marine has always succeeded in this purpose.

Stabilis Electra can also be integrated with other CMC Marine systems, such as the electric bow/stern thrusters, using an unique control device both for fins and thruster control systems.

THE KEY TO SUCCESS: RESEARCH & DEVELOPEMENT

R&D Department is the lifeblood of the company, where innovation and continuous research are the central points of CMC Marine’s philosophy.

Brilliant people, whose ideas are always a step forward, compose the R&D Department team: all its members come from the most eminent Universities of Italy. A continuous melting pot of new ideas, projects, technical developments are the core activity of our team, always pursuing CMC Marine’s main purpose: reinventing the innovation.

FIND OUT MORE

BROCHURE

EU PATENT (N. 2172394)

DIALOG ELECTRONIC CONTROLLER
(PATENT N. TO2012A000472)

NO NOISE

MAXIMUM COMFORT AT ANCHOR

EASY INSTALLATION

NO MAINTENANCE

 NO HYDRAULIC ON BOARD

MINIMUM
POWER ABSORPTION

COMPACT UNIT

HIGH CONTROL OVER THE SYSTEM PERFORMANCE

STABILIS ELECTRA RANGE

Model YACHT SIZE POWER RANGE STANDARD FIN SIZE
SE40 20 m/25 m 5,0 Kw 0,60 – 0,80
SE60 23 m/25 m 5,0 Kw 1,00 – 1,20 – 1,40
SE80 30 m/40 m 5,0 Kw/7,0 Kw 1,60 – 1,85
SE120 40 m/54 m 7,0 Kw/9,0 Kw/11,0 Kw 1,85 – 2,00 – 2,35 – 2,50
SE120 XP 40 m/54 m 11,0 Kw 2,80
SE160 > 55 m 15,0 Kw 2,80 – 3,00 – 3,30 – 3,50
SE200 > 55 m 22 Kw 4,00
SE40

TECHNICAL SPECIFICATIONS
(for one actuator)

Electrical motor: Brushless type with elettromagnetic brake.
Applicable range of electrical motor: 2.0 kW or 3.5 kW motor rating.
Standard fin size: 0,60 m2, 0,80 m2
Fin rotational speed: From 0 deg/s to 80 deg/s
Voltage: 400VAC 3-phase or 200VAC 3-phase or 200VAC 1-phase.
Frequency: 50 Hz or 60Hz.
Maximum absorption range in underway condition*: 0,4 kW (with the 2,0 kW motor) – 0,7 kW (with the 3,5 kW motor)
Maximum power absorption in at anchor condition*: 1,2 kW (with the 2,0 kW motor) – 2,0 kW (with the 3,5 kW motor)
Fin attachment: Precision machined oversized self-locking taper.
Main shaft: 75 mm diameter duplex stainless steel.
Fin actuator housing material: High strength ductile iron.
Upper and lower bearing: Heavy-duty tapered roller bearings.
Lower seal: Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer.
Upper seal: Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants.
Lubrication: Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil.
Fit & finish throughout: Painted RAL 9016 and polished.
Actuator weight (including the electric motor): 102 Kg
SE60

TECHNICAL SPECIFICATIONS
(for one actuator)

Electrical motor: Brushless type with elettromagnetic brake.
Applicable range of electrical motor: 5.0 kW motor rating.
Standard fin size: 1,00 m2, 1,40 m2
Fin rotational speed: From 0 deg/s to 80 deg/s
Voltage: 400VAC 3-phase or 200VAC 3-phase or 200VAC 1-phase.
Frequency: 50 Hz or 60Hz.
Maximum absorption range in underway condition*:  0.9 KW with the 5,0 kW motor
Maximum power absorption in at anchor condition*: 3.4 KW (with the 5,0 kW motor)
Fin attachment: Precision machined oversized self-locking taper.
Main shaft: 85 mm diameter duplex stainless steel.
Fin actuator housing material: High strength ductile iron.
Upper and lower bearing: Heavy-duty tapered roller bearings.
Lower seal: Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer.
Upper seal: Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants.
Lubrication: Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil.
Fit & finish throughout: Painted RAL 9016 and polished.
Actuator weight (including the electric motor): 145 Kg
SE80

TECHNICAL SPECIFICATIONS
(for one actuator)

Electrical motor: Brushless type with elettromagnetic brake.
Applicable range of electrical motor: 5.0 kW or 7 kW motor rating.
Standard fin size: 1,60 m2, 1,85 m2
Fin rotational speed: From 0 deg/s to 80 deg/s
Voltage: 400VAC 3-phase or 200VAC 3-phase.
Frequency: 50 Hz or 60Hz.
Maximum absorption range in underway condition*: 1,2 kW (with the 5,0 kW motor) – 1,8 KW (with the 7,0 kW motor)
Maximum power absorption in at anchor condition*: 3,8 kW (with the 5,0 kW motor) – 7,0 KW (with the 7,0 kW motor)
Fin attachment: Precision machined oversized self-locking taper.
Main shaft: 100 mm diameter duplex stainless steel.
Fin actuator housing material: High strength ductile iron.
Upper and lower bearing: Heavy-duty tapered roller bearings.
Lower seal: Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer.
Upper seal: Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants.
Lubrication: Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil.
Fit & finish throughout: Painted RAL 9016 and polished.
Actuator weight (including the electric motor): 235 Kg
SE120

TECHNICAL SPECIFICATIONS
(for one actuator)

Electrical motor: Brushless type with elettromagnetic brake.
Applicable range of electrical motor: 7.0 kW or 11.0 kW motor rating.
Standard fin size: 1,85 m2, 2,50 m2
Fin rotational speed: From 0 deg/s to 80 deg/s
Voltage: 400VAC 3-phase or 200VAC 3-phase.
Frequency: 50 Hz or 60Hz.
Maximum absorption range in underway condition*: 0,4 kW (with the 2,0 kW motor) – 0,7 kW (with the 3,5 kW motor)
Maximum power absorption in at anchor condition*:
Fin attachment: Precision machined oversized self-locking taper.
Main shaft: 120 mm diameter duplex stainless steel.
Fin actuator housing material: High strength ductile iron.
Upper and lower bearing: Heavy-duty tapered roller bearings.
Lower seal: Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer.
Upper seal: Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants.
Lubrication: Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil.
Fit & finish throughout: Painted RAL 9016 and polished.
Actuator weight (including the electric motor):
SE120 xp

TECHNICAL SPECIFICATIONS
(for one actuator)

Electrical motor: Brushless type with elettromagnetic brake.
Applicable range of electrical motor: 11 kW motor rating.
Standard fin size: 2,80 m2
Fin rotational speed: From 0 deg/s to 80 deg/s
Voltage: 400VAC 3-phase or 200VAC 3-phase
Frequency: 50 Hz or 60Hz.
Maximum absorption range in underway condition*:  3,2 KW (with the 11,0 kW motor)
Maximum power absorption in at anchor condition*:  6,5 KW (with the 11,0 kW motor)
Fin attachment: Precision machined oversized self-locking taper.
Main shaft:
Fin actuator housing material: High strength ductile iron.
Upper and lower bearing: Heavy-duty tapered roller bearings.
Lower seal: Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer.
Upper seal: Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants.
Lubrication: Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil.
Fit & finish throughout: Painted RAL 9016 and polished.
Actuator weight (including the electric motor):
SE160

TECHNICAL SPECIFICATIONS
(for one actuator)

Electrical motor: Brushless type with elettromagnetic brake.
Applicable range of electrical motor: 15 kW motor rating.
Standard fin size: 2,80 m2, 3,50 m2
Fin rotational speed: From 0 deg/s to 80 deg/s
Voltage: 400VAC 3-phase or 200VAC 3-phase..
Frequency: 50 Hz or 60Hz.
Maximum absorption range in underway condition*:
Maximum power absorption in at anchor condition*:
Fin attachment: Precision machined oversized self-locking taper.
Main shaft: 140 mm diameter duplex stainless steel.
Fin actuator housing material: High strength ductile iron.
Upper and lower bearing: Heavy-duty tapered roller bearings.
Lower seal: Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer.
Upper seal: Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants.
Lubrication: Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil.
Fit & finish throughout: Painted RAL 9016 and polished.
Actuator weight (including the electric motor): 350 Kg
SE200

TECHNICAL SPECIFICATIONS
(for one actuator)

Electrical motor: Brushless type with elettromagnetic brake.
Applicable range of electrical motor: 22 kW motor rating.
Standard fin size: 4,00 m2
Fin rotational speed: From 0 deg/s to 80 deg/s
Voltage: 400VAC 3-phase or 200VAC 3-phase.
Frequency: 50 Hz or 60Hz.
Maximum absorption range in underway condition*:
Maximum power absorption in at anchor condition*:
Fin attachment: Precision machined oversized self-locking taper.
Main shaft:
Fin actuator housing material: High strength ductile iron.
Upper and lower bearing: Heavy-duty tapered roller bearings.
Lower seal: Two double-lip seals for maximum seawater protection. Easily accessible in a 316 stainless steel retainer.
Upper seal: Double-lip, spring-loaded seal for grease retention. The double-lip design also provides protection of the fin actuator against external contaminants.
Lubrication: Pre-packed with water-resistant grease for lifetime maintenance-free service. Reduction gearbox lubricated with mineral oil.
Fit & finish throughout: Painted RAL 9016 and polished.
Actuator weight (including the electric motor):

ARE YOU INTERESTED IN
THE BEST COMFORT ON BOARD?